1. Manuals
  2. Brands
  3. PDG Mobility Manuals
  4. Wheelchair
  5. Stellar
  6. Owner's operation & maintenance manual

PDG Mobility Stellar Owner's Operation & Maintenance Manual

Manual tilt wheelchair
Hide thumbs Also See for Stellar:
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Operation & Maintenance Manual
STELLAR Manual Tilt Wheelchair
DEALER: This manual must be given to the user of the wheelchair
USER: Before using this wheelchair, read this entire manual and
save for future reference
For more information regarding PDG products,
parts and service, please visit www.pdgmobility.com
1
Class 1 Medical Device
March 2008
Class 1 Medical Device
Registration CA 004986
Registration CA 004986

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stellar and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PDG Mobility Stellar

Summary of Contents for PDG Mobility Stellar

  • Page 1 Owner’s Operation & Maintenance Manual STELLAR Manual Tilt Wheelchair DEALER: This manual must be given to the user of the wheelchair USER: Before using this wheelchair, read this entire manual and save for future reference For more information regarding PDG products, parts and service, please visit www.pdgmobility.com...

  • Page 2: Table Of Contents

    WARNING Do not operate this equipment without first reading and understanding this manual. If you are unable to understand the warnings and instructions, contact a health care professional such as a doctor or therapist who is familiar with this type of product before attempting to use this equipment. Otherwise, injury or damage may result.

  • Page 3: Special Notes

    SPECIAL NOTES WARNING/CAUTION notices as used in this manual apply to hazards or unsafe practices which could result in personal injury or property damage. NOTICE: THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. WHEELCHAIR USER As a manufacturer of wheelchairs, PDG endeavors to supply wheelchairs to meet many needs of the end user.

  • Page 4: Safety Handling Of Wheelchairs

    WEIGHT LIMITATION The PDG Stellar wheelchair has a weight limitation of 350 lb. unless otherwise specified by PDG. SAFETY/HANDLING OF WHEELCHAIRS “Safety and Handling” of the wheelchair requires close attention of the wheelchair user as well as the assistant.
  • Page 5 Be aware of any removable (detachable) parts. These must NEVER be used for hand-held or lifting supports, as they may be inadvertently released, resulting in possible injury to the user and/or assistant(s). When learning a new assistance technique, have an experienced assistant help before attempting it alone.
  • Page 6 STAIRWAYS WARNING: Do not attempt to lift a wheelchair by lifting on any removable (detachable) parts. Lifting by means of any removable(detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair. Extreme caution is advised when it is necessary to move an occupied wheelchair up or down the stairs. PDG recommends using two(2) assistants and making thorough preparations.
  • Page 7 FUNCTIONAL REACH FROM A WHEELCHAIR PERCENTAGE OF WEIGHT DISTRIBUTION WARNING: DO NOT attempt to reach objects if you have to move forward in the seat or pick them up frm the floor by reaching down between your knees. Many activities require the wheelchair owner to reach, bend and transfer in and out of the wheelchair.

  • Page 8: Standard Features

    2. Remove all loose packing from the carton. 3. Carefully remove all components from the carton. NOTE: Unless the PDG Stellar is to be assembled immediately, retain cartons and packing materials for use in storing the wheelchair until assembly is required.

  • Page 9: Safety Inspection Checklist

    STORAGE 1. Store the repackaged PDG Stellar in a dry area. 2. DO NOT place other objects on top of the repackaged wheelchair. SAFETY INSPECTION CHECKLIST NOTE: Twice a year take your wheelchair to a qualified dealer for a thorough inspection and servicing.

  • Page 10: Troubleshooting

    ITEM INITIALLY WEEKLY MONTHLY PERIODICALLY TIRES (PROCEDURES 5 and 6) Inspect for flat spots and wear. If pneumatic tires, check for proper installation. Inspect rear tires for cracks and wear. CAUTION: Wheels and tires should be checked periodically for cracks and wear, and should be replaced when necessary.

  • Page 11: Procedure 1 - Front Riggings

    SUGGESTED MAINTENANCE PROCEDURES 1. Before using your PDG Stellar, make sure all nuts and bolts are tight. Check all parts for damage or wear and replace. Check all parts for proper adjustment. 2. Keep quick-release axles, if applicable, free of dirt and lint to ensure positive locking and proper operation.

  • Page 12: Procedure 2 - Arms

    NOTE: Check to ensure that desired front rigging adjustment does not cause pressure to legs at front of seat upholstery. Such a condition could cause injury to the occupant. WARNING: DO NOT ATTEMPT TO STAND ON FOOT PLATES. Standing on the foot plates will cause the chair to tip forward abruptly and may result in an injurious fall to the individual.

  • Page 13: Procedure 4: Rear Wheels

    PROCEDURE 4: REAR WHEELS This Procedure Includes the Following: Removing/Installing the Rear Wheels Adjusting the Axle Location / Wheel Position Adjustment Removing/Installing the Rear Wheels/Axles 1. Unless the product was ordered with quick-release axles, the rear wheels can be removed using a ¾” socket head and a ¾”...

  • Page 14: Procedure 6 - Seat To Floor Heights

    An additional 2” height can be obtained by using an elevation extender kit. Refer to the Stellar spec sheet for different seat height/front caster/rear wheel combinations. 1. Remove the socket head screws located on the outside of the seat pan assembly (one screw on each side).

  • Page 15: Procedure 8 - Adjust Gas Strut And Cable Assembly

    Adjusting Seat Tilt: 1. To adjust the tilt angle, activate the tilting lever located on side of push handle or on the armrest, depending on how the wheelchair has been configured. Allow seat back to lower to desired level and release tilt lever.
  • Page 16 Installing the Gas Strut Actuator Cable 1. Fit metal cable-end into hole 3. Push plastic parts on trigger. together until they 'click' in place 2. Feed cable through to the 4. Clip cable onto back front of the trigger post using plastic clips provided.

  • Page 17: Procedure 9: Motor Vehicle Use

    Axle positions are noted by the location of the rear edge of the axle plate on the ruled sticker on the frame. The hole position on the anti-tip tube is described by the diagram below. Stellar Axle Position Anti-tip Wheel Position 3 ½”...
  • Page 18 7. Do not alter or substitute wheelchair frame parts, components or seating. 8. The figures below show the locations of the wheelchair securement points, front and back. Stellar Front Tiedown Stellar Rear Tiedown 9. Use only with Wheelchair Tie Down and Occupant Restraint Systems (WTORS) that have been installed in accordance with the manufacturer’s instructions and SAE J2249.
  • Page 19 PERFORMANCE ATTRIBUTES OF THE TEST WHEELCHAIR Test Test Title Relevant Disclosure Method Wheelchair Type Manual All results meet at least the minimum performance requirements of AS 3695 Determination Manual Stable on a slope of 10° or labelled in accordance 3696.1 of static stability with Clause 6.1 Pass (100kg dummy)

  • Page 20: Disclosure And Warranty

    LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser/user of our products. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.
  • Page 21 THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS. PRODUCT DESIGN GROUP INC. Ph: (604) 323-9220 Fax: (604) 323-9097 E-mail: info@pdgmobility.com www.pdgmobility.com...

Table of Contents