Chapter 4 - Voice Commands; Voice Commands Overview - Multitech SocketModem MT5600SMI Reference Manual

Chapter 4 – Voice Commands

Voice Commands Overview

Voice commands are identified in Table 4-1.
Table 4-1. Voice Commands
Command
+FCLASS
+VCID
+VNH
+FMI?
+FMM?
+FMR?
+FLO
+VIP
+VRX
+VTS
+VTX
+VGR
+VGT
+VIT
+VLS
+VRA
+VRN
+VSD
+VSM
+VTD
+VDR
+VDT
+VPR
Multi-Tech Systems, Inc. SocketModem MT5600SMI/MT5656SMI Reference Guide (S000306C)
Function
Configuration
Set Mode
Caller ID (CID)
Automatic Hang-up control
Manufacturer Identification
Product Identification
Version, Revision, etc.
Flow Control
Voice
Voice Initialize All Parameters
Start modem Receive (Record)
Voice Tone Send (Send single frequency or DTMF)
Start modem Transmit (Playback)
Voice Gain Receive (Record Gain)
Voice Gain Transmit (Playback Volume)
Voice Inactivity Timer (DTE/Modem)
Analog Source/Destination Selection
Ringback Goes Away Timer
Ringback Never Appeared Timer
Silence Detection (QUIET & SILENCE)
Compression Method Selection
Beep Tone Duration Timer
Distinctive Ring
Control Tone Cadence Reporting
Select DTE/modem Interface Rate (Turn off autobaud)
Chapter 4 – Voice Commands
97