CAUTION:
6.
Enter the following command:
passwd
7.
Enter a new password at the New Password prompt.
8.
Press [ENTER].
9.
Retype the password at the Retype new password prompt.
10. Press [b]. The password is changed.
11. Press [b] to continue booting.
Reset Appliance Mode
On the appliance's LCD, reset the server mode (personality). See the installa-
tion guide for instructions on setting and changing the personality.
Changing the appliance server mode (personality) resets the passwords, but
it also restores the entire system to the default state—deleting data and
erasing configuration settings.
Resetting the NAC 800 Database Password
The NAC 800 database password is set during the install process. You can not
change your database password with NAC 800 later. If your database password
gets changed by some other method after NAC 800 is installed, NAC 800 will
not be able to communicate with the database. In this case, contact ProCurve
Networking by HP for assistance.
Changing the NAC 800 Administrator Password
To reset the NAC 800 administrator console User Name and Password when
known:
See "Modifying the MS root Account Password" on page 3-26.
To reset the NAC 800 administrator console User Name and Password when
unknown:
Command line window
System Administration
Managing Passwords
13-37