Other - HP 800 User Manual

9. Re-enter the console password.
10. Enter the Enable mode user name.
11. Enter the password with which to enter enable mode.
12. Re-enter the enable mode password.
13. Enter the Reconnect idle time. This is the amount of time in milliseconds
that a telnet/SSH console can remain idle or unused before it is reset.
14. Select the Device is stacked check box if the device is in a stacked
configuration.
15. Select the Show scripts plus symbol to show the following scripts:
• Initialization script – The expect script used to log into the console and
enter enable mode.
Re-authentication script – The expect script used to perform endpoint
•
re-authentication.
Exit script – The expect script used to exit the console.
•
16. Click ok.
TIP:
Click revert to defaults to restore the default settings.

Other

To add a non-listed 802.1X device:
NAC 800 home window>>System configuration>>Quarantining>>802.1X
Quarantine method radio button>>Add an 802.1X device
System Configuration
Quarantining
3-83