HP 800 User Manual page 326

802.1X Quarantine Method
Setting Up the 802.1X Components
#
#"CheckupRadiusAttributes"
# Tunnel-Medium-Type := 6,
# Tunnel-Private-Group-ID := 50,
# Tunnel-Type := VLAN,
"QuarantineRadiusAttributes"
Tunnel-Medium-Type := 6,
Tunnel-Private-Group-ID := 15,
Tunnel-Type := VLAN,
"InfectedRadiusAttributes"
Tunnel-Medium-Type := 6,
Tunnel-Private-Group-ID := 15,
Tunnel-Type := VLAN,
"UnknownRadiusAttributes"
Tunnel-Medium-Type := 6,
Tunnel-Private-Group-ID := 5,
Tunnel-Type := VLAN,
#
# Use these attributes for Extreme switches
#
#"HealthyRadiusAttributes"
# Extreme-Netlogin-Vlan := HealthyVlanName
#
#"CheckupRadiusAttributes"
# Extreme-Netlogin-Vlan := HealthyVlanName
#
#"QuarantineRadiusAttributes"
# Extreme-Netlogin-Vlan := QuarantineVlanName
#
#"InfectedRadiusAttributes"
# Extreme-Netlogin-Vlan := QuarantineVlanName
#
#"UnknownRadiusAttributes"
# Extreme-Netlogin-Vlan := TempOrGuestVlanName
#
# TO DO - Uncomment if you want different switches to have different
attributes.
# Posture is Healthy, Checkup, Quarantine, Infected, or Unknown.
# This entry must come after the default set of attributes in the
file.
11-42