Immediately Quarantine An Endpoint; Clearing Temporary Endpoint States - HP 800 User Manual
Network access controller
Hide thumbs
Also See for 800:
- User manual (586 pages) ,
- Manual (106 pages) ,
- Installation manual (34 pages)
Table of Contents
Advertisement
Immediately Quarantine an Endpoint
To immediately quarantine an endpoint:
NAC 800 Home window>>Endpoint activity
1.
Select a box or boxes to select the endpoints of interest.
Click change access.
2.
3.
Select the Temporarily Quarantine for radio button.
Select minutes, hours, or days from the drop-down list.
4.
5.
Enter the number of minutes, hours, or days that the endpoint will be
temporarily quarantined.
Click ok.
6.
TIP:
To quarantine again, select the endpoint, click change access, select Clear
temporary access control status, and click ok.
Clearing Temporary Endpoint States
Endpoints can have a temporary state designated through the Quarantine for
or Allow access for radio buttons. This state is indicated with the words "by
admin" in parenthesis in the access states column.
To clear a temporary state set by the admin:
NAC 800 Home window>>Endpoint activity
1.
Select a box or boxes to select the endpoints of interest.
Click change access.
2.
3.
Select the Clear temporary access control status radio button.
Click ok.
4.
Endpoint Activity
Acting on Selected Endpoints
4-17
Advertisement
Chapters
Table of Contents
