HP 800 User Manual page 329

Figure 11-32. IAS, Windows Client Authentication
3. General tab –
Select the Show icon in notification area when connected check box.
a.
This enables the Windows XP balloon help utility, which can assist you
when entering information and troubleshooting errors.
4. Authentication tab –
Select the Enable IEE 802.1X authentication for this network check box.
a.
b. Select an EAP type from the drop-down list. For this example, select
MD5-Challenge.
Important: This EAP type must match the EAP type selected in step
7, step q on page 11-19.
Clear or select the Authenticate as computer when computer information
c.
is available check box. The choice is yours.
5. Click OK.
6. Select to reboot if necessary.
How to enable a Windows XP Home endpoint for 802.1X:
802.1X Quarantine Method
Setting Up the 802.1X Components
11-45