Page 3
Optical HDMI Extender user’s manual Thank you for your purchase of the DataBay Optical HDMI (High Definition Multimedia Interface) Extender. You now have a high quality and durable device to extend high resolution content with the highest quality to 200 meters. This manual contains will assist you in installing and operating the product.
Page 4
System Requirements for Setup Hardware requirements You have to have a HDMI port in your PC, DVD player or Multimedia playing device. It should support the maximum graphic resolution feature of displays to be connected. There is no other special requirement. Software requirements No special restrictions, if you’ve already properly installed your HDMI instrument.
Page 5
Installation Important: Please use the installation procedure below. Improper or no operation may result if the start-up sequence is not correctly followed. Figure 3 Installation of Optical HDMI extender Installation Step Put ‘TX’ module near to HDMI signal source, such as DVD players or computers.
Ensure that the TX, RX and power modules are stored or used in a benign environment free from liquid or dirt contamination. There are no user serviceable parts. Refer all service and repair issues to DataBay. Technical Support and Service For commercial or general product support, contact your reseller.
Page 7
FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the ET-HF0101-TG200 and is the answer not in the manual?
Questions and answers