Dhcp Server Configuration - Set Dns Manually - Modecom MC-4220 User Manual

DHCP Server Configuration - Set DNS Manually

• From the left-hand
• From check ratio, click on
• Enter the IP Address of DNS.
• Click on Apply Changes.
Field
Attain DNS
Automatically
Set DNS
Manually
Function Button Description
Apply Changes
Reset Selected
• Change setting successfully! Click
Services menu, click on DNS -> DNS Server.
Attain Set DNS Manually.
Description
Select this item if you want to use the DNS servers obtained by
the WAN interface via the auto-configuration mechanism.
Select this item to configure up to three DNS IP addresses.
Set new DNS relay configuration. New parameters will take effect
after save into flash memory and reboot the system. See section
"Admin" for save details.
Discard your changes.
802.11n WLAN ADSL2+ Router
OK button.
71