Configuring Ethernet Pcs; Connecting The Hardware - Modecom MC-4220 User Manual

802.11n WLAN ADSL2+ Router

Configuring Ethernet PCs

This chapter assumes that you have already established a DSL service with your
Internet service provider (ISP). These instructions provide a basic configuration that
should be compatible with your home or small office network setup. Refer to the sub-
sequent chapters for additional configuration instructions.

Connecting the Hardware

This section describes how to connect the device to the wall phone port, the power
outlet and your computer(s) or network.
WARNING
The diagram below illustrates the hardware connections. The layout of the ports
on your device may vary from the layout shown. Refer to the steps that follow for
specific instructions.
10
Before you begin, turn the power off for all devices. These include
your computer(s), your LAN hub/switch (if applicable), and the Wireless
ADSL2+ Router.
www.modecom.eu
Overview of Hardware Connections