Replacing The Fuse; Technical Specifications; Pap_Series_V_1_0.Doc - Omnitronic PAP-350 Instruction Manual

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply: 230 V AC, 50 Hz ~
Output power: 350 W RMS
70 V, 100 V or 4-16 Ω
Output type:
Output current:
70 V 5 A
100 V 3.5 A
Line input: 300 mV, 10 kOhms
Frequency range: 80 Hz - 16 kHz
Distortion: 0.5 % (1 kHz)
S/N-ratio Line: 90 dB
Dimensions: 483 x 385 x 92 mm
Weight: 16 kg
Please note: Every information is subject to change without prior notice. 20.03.2006 ©
PAP-350
230 V AC, 50 Hz ~
650 W RMS
70 V, 100 V or 4-16 Ω
3.6 A
2.5 A
300 mV, 10 kOhms
80 Hz - 16 kHz
0.5 % (1 kHz)
90 dB
483 x 385 x 92 mm
18 kg
PAP-350
230 V AC, 50 Hz ~
350 W RMS
70 V, 100 V or 4-16 Ω
5 A
3.5 A
300 mV, 10 kOhms
80 Hz - 16 kHz
0.5 % (1 kHz)
90 dB
483 x 385 x 138 mm
24 kg
23/23
PAP-1000

PAP_SERIES_V_1_0.DOC