Description - 2N EasyGate Pro User Manual

2.1 Description

EasyGate consites of GSM (UMTS) gateway in white plastic cover, removable antenna
and cables for connecting to phone set and PC
®
2N
are described in the following figure.
Figure 2.1
EasyGate LED
indicators
Steady state – signalization of signal
strength
FXS line off hook – signalization of
battery state (battery backup type only)
Figure 2.2
EasyGate
Connectors
USB
(USB 2.0)
EasyGate 's status is indicated by LED diodes on its front side. All possible states
Signal strength/battery indicator
Power supply
connector
(DC Jack 2.1 mm,
internal contact +)
Power supply
Lights blue
Lights yellow
Flashes 1x in 2s HW error, contact the
No light
Mobile network
Lights blue
Flashes:
1x in 1s
1x in 3s
4x quickly
8x quickly
Quickly and continuously
All functions are blocked. Your SIM doesn't
correspond to the operator lock.
Data – PC connection status
Lights green
Flashes:
Quickly
1x in 3s
No light
Telephone line
No light
Flashes quickly
Lights yellow
Fax models only:
Flashes 2x then pause
Flashes 3x then pause
Telephone SMS connector
line (SMS sending input)
(RJ 12, 6/2)
Description
device is powered from the grid.
device is powered from the
battery.
manufacturer
Power switched off or HW error
Registered to GSM (UMTS)
not registered, SIM card inserted
not registered,
SIM card not inserted
enter your PIN
enter your PUK (use mobile
phone)
PC connected
incoming data call (CSD)
data connection (CSD or GPRS)
PC not connected
Standby
line off-hook or ringing
call FXS – GSM (UMTS)
Fax or modem connection in
progress; after power on
signalizes need of FW upgrade
fax or modem connection in
progress
SIM Switch
(ON/OFF)
2.1
14