Maintenance And Cleaning - Fakir C-240 Instruction Manual

Connecting the telescopic vacuum
tube
After the vacuum hose is connected,
connect the telescopic tube to the end
of the vacuum hose.
NOTE: Only one end of the telescopic
tube is suitable for vacuum hose.
The other end is for swiveling floor
nozzle.
After the telescopic vacuum tube is
connected, the height of the tube can
be adjusted by pushing the button and
pulling the tube vertically.
Connecting the swiveling floor nozzle
Connect the swiveling floor nozzle to
the end of the telescopic vacuum tube.
Swiveling floor nozzle is a multi-purpose
nozzle, which can be used both for
hard floors and carpets.
Using for hard floors:
Press the button on swiveling floor
nozzle with your foot to let the brush
inside the nozzle come out. With this
setting, the nozzle can be used to
vacuum the hard floors.
Using for carpets:
The brush of the nozzle will disappear
by pressing the button on swiveling
floor nozzle with your foot again. With
this setting, the nozzle can be used to
vacuum the carpets.
Connecting the accessories
The accessories of the vacuum cleaner
can be used by connecting them to
the vacuum hose.
10
Using your vacuum cleaner
Pull the power cord. Plug the pins into
the socket. Press the power button on
the vacuum cleaner. You can start
vacuuming now. The suction power of
the vacuum cleaner can be adjusted
according to the suction power adjust
key on the appliance.
WARNING: A YELLOW mark on the
power cable shows the ideal cable
length. Do not extend the cable
beyond the RED mark.
After Use
To carry the vacuum cleaner, you can
use the ergonomic carry-handle.
Storage
Switch the appliance off and remove
the mains plug from the wall socket.
Rewind the mains cord by pressing the
cord rewind button. In order to rewind
the cord correctly, guide the cord with
one hand when you press the cord
rewind button. Keep doing this until all
the cord is rewinded.
After cord rewind, lift the vacuum
cleaner up and attach the tube to the
base to take the appliance to park
position.

Maintenance and Cleaning

Changing the dustbag
The dustbag needs to be replaced
according to your use frequency.
To change the dustbag,
1. Turn off the appliance and unplug from
the mains.