Changing The Filters - Fakir C-240 Instruction Manual

2. Open the front cover.
3. Remove the dustbag holder and
remove the full dustbag.
4. Insert the new dustbag into the dustbag
holder.
5. Insert the dustbag holder into the
lowerhousing.
6. Close the lid ('ticktack')
7. Note that it is impossible to close the
cover when no dustbag has been
inserted.
In the box of the appliance, there are
3 Microbag dustbags. You can use
them according to your need. For extra
need, please contact with authorized
Fakir Service.

Changing the Filters

In-Let filter
The in-let filter needs to be replaced
according to your use frequency.
To change the in-let filter,
1. Turn off the appliance and unplug from
the mains.
2. Open the front cover.
3. Lift up the filter behind the dustbag.
4. Slide the new filter down its place.
5. Close the front cover.
HEPA Filter
HEPA filter filters the exhaust air.
According to your use frequency the
HEPA filter should be changed in 6
months to 1 year.
To change the HEPA filter,
1. Turn off the appliance and unplug from
the mains.
2. Dismantle the grill between the On/Off
switch and cord rewind by pressing
the release button.
3. Take the old HEPA filter out.
4. Place the new HEPA filter in its place.
5. Place the grill to its place and push it
until you hear the click sound.
Cleaning
The housing, cord and the plug of the
vacuum cleaner has to be cleaned with
a very soft damped cloth. Never use
chemicals on the appliance.
If you experience insufficient suction
power,
Please check:
• If the dustbag is full?
• If the nozzle, tub or hose is blocked?
To remove the obstruction, let the air
flow through the hose and/or tube in
opposite direction.
Dispatch:
Carry the appliance in the original
package or a similar, well-padded
package to prevent damage to the
appliance.
11