Table of Contents
Advertisement
GB
FRANKY PRO I BLDC
Removing apparatus
By pressing the release buttons on the apparatus, you can remove the accessories
from the vacuum tube or the flexible hose as shown in the picture below.
Cleaning and Maintenance
Emptying the dust canister
Open the lid of the dust canister swing base by pulling the dust canister opening.
Empty the garbage. Close the lid. Make sure it is locked.
Dust canister swing base release button -
Disassembling and cleaning the dust canister
Press the dust canister release button as shown in the picture below. Separate the
dust canister from the main body by turning it in the direction of the arrow on it. Empty
the dust canister. You can clean the cyclone with a toothbrush. You can only clean the
empty canister under cold water. Make sure that all the parts are dry before
assembling them for future use.
36
Advertisement
Table of Contents
