Operating; After Operation; Maintenance And Cleaning - Fakir DIEGO IMPACT User Manual

Operating

1. Plug in the power cord by holding from the plug and pulling up to the warning line.
2. Install the desired accessories as described above.
3. Turn on the vacuum cleaner by pressing the on/off switch.
WARNING!
If you are going to leave the work area, switch off the machine.

After operation

1.Turn off your appliance using the on/off switch.
2.Then unplug the appliance.
3.When you press the cord recoiling button, the cord will be automatically recoiled. Hold the
plug with your hand until the cord is completely recoiled.
WARNING!
Immediately after completing your vacuuming, perform the steps above. Never leave
your appliance unattended.

Maintenance and Cleaning

1. Emptying and Cleaning the Dust Tank
1. Press the dust tank lock under the handle.
2. Remove the dust tank by pulling upward.
3. Pull out the dust tank discharge latch under the tank.
4. Empty/clean the dust tank.
5. Remove the cylinder filter by turning it as shown.
6. You can wash the filter under running water with the water temperature max. 40°C. Make
sure the tank is dry enough.
7. Close the lid of the tank and place the dust tank to its place on top of the main body and
make sure it is locked.
Dust tank discharge latch
25
EN