1. Manuals
  2. Brands
  3. Cable Electronics Manuals
  4. Matrix Switcher
  5. CE Labs HSW44C
  6. Instruction manual

Cable Electronics HSW44C Instruction Manual

4x4 hdmi over cat5 matrix with ir pass-through
Hide thumbs Also See for HSW44C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Enlarged version
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at
www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
Document: HSW44C_manual.pdf
HSW44C
4x4 HDMI over CAT5 Matrix
with IR Pass-through
7. 1 CH
. CH
AUDI O
UDO

Advertisement

Table of Contents
loading

Related Manuals for Cable Electronics HSW44C

Summary of Contents for Cable Electronics HSW44C

  • Page 1 • HD Matrix Switchers • RF amplifiers • HDMI and Component HD distribution amplifiers • CAT 5 Signal Extenders HSW44C • VGA Extenders and Splitters • and cables of all types. 4x4 HDMI over CAT5 Matrix See our full product line at www.celabs.net...
  • Page 2 SAFETEY & NOTICE The HSW44C 4x4 HDMI over CAT5 Matrix with IR Pass-through has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the HSW44C should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
  • Page 3 If in rare situation you find it cannot work with the HSMR HSW44C, please use any +5V power adapter to plug in the power jack TiVo and see if it can work. If not, please contact your technical support for further service.
  • Page 4 FEATURES IR DIRECT CODES Default Custom Code — IR2 Code: 00 FF • State-of-the-art Silicon Image (Founder of HDMI) chipset embedded for upmost compatibility and reliability — Function POWER • HDMI 1.3c compliant 0x0A 0x0C 0x17 0x02 • HDCP compliant SOURCE SEL.

  • Page 5: Edid Learning

    EDID LEARNING SPECIFICATIONS & PACKAGE CONTENTS The EDID learning function is only necessary whenever you encounter any Model Name HSW44C display on the HDMI output port that cannot play audio and video Technical HSW44C HSMR properly. Because the HDMI source devices and displays may have...

  • Page 6: Display Side

    4 external power supply. If in rare situation you find it cannot work with the HSW44C, please use any +5V power supply unit to plug in the power jack Note and see if it can work. If not, please contact our technical support for further Right ( ) button to switch input source in ascending order (1, 2, 3, 4, 1, 2, ..)

  • Page 7: Panel Descriptions

    HSW44C Parity: None Set Command 0x08 0x4d 0x41 0x51 0x44 0x05 0x31~0x2f 0xaa Set HSW44C’s device ID *0x01~0xff 0x0c 0x4d 0x41 0x51 0x44 0x0c+…+port4 0xaa Set HSW44C’s source Device_Id 0x02 port1 port2 port3 port4 mapping of output port Status Command 1.
  • Page 8 The HSMR has been tested extensively and found that it doesn’t require external power supply. If in rare situation you find it cannot work with the HSW44C, please use any +5V power adapter to plug in the power jack and see if it can work. If not,...

  • Page 9: Dip Switch

    DIP SWITCH Scan: Choose COM port number and Device ID for scan. Then tick “Scan Device ID”and press “Scan” button to know which for EDID/Audio SW1-SW4 COM port is connected based on this Device ID. DIP Switch Position Video Audio Description Pin 1 Pin 2...
  • Page 10 7. Sequence for firmware update WARNING! [Firmware update only can be done via RS-232 port and connection to PC set at COM1) [1] Power off the HSW44C. [2] Set the DIP switch position to Firmware Update Mode. [3] Power on the HSW44C.

  • Page 11: Channel Control

    1 to 4. HSMR IR RECEIVER: IR receiver connected here can receive all IR command signals from the IR remote controls of HSW44C and all other HDMI source devices.

  • Page 12: Hardware Installation

    3. Connect each TMDS output port on the HSW44C to respective TMDS input on the remote receiver HSMR 4. Connect IR blaster to the IR MAIN jack of HSW44C and direct the IR blaster to the built-in IR receiver of the sources 5.

Table of Contents