Related Manuals for Cable Electronics HSW44C Plus
Summary of Contents for Cable Electronics HSW44C Plus
- Page 1 HSW44C Plus 4x4 HDMI Matrix Switch with CAT5 OUTPUT and up to 60KHz IR 7.1 CH 7.1 CH AUDIO AUDIO...
-
Page 2: Safety And Notice
INTRODUCTION Safety and Notice The HSW44C Plus 4x4 HDMI & Full 3D support over CAT5 Matrix with IR Pass-through The HSW44C P lus 4x4 HDMI M atrix Switch w ith CAT5 O UTPUT and up t o 60KHz IR provides the most flexible and cost effective solution in the market to route high defini- has been t ested for conformance to safety regulations and requirements, a nd tion video sources plus multi-chanel (up to 7.1-channel) digital audio from any of the four... - Page 3 Specifications & Package Contents Features Model Name HSW44C Plus State-of-the-art Silicon Image (Founder of H DMI) chipset embedded for u pmos t Technical HSW44C Plus HSMR Plus compatibility and reliability True 4x4 matrix switcher HDMI 1.3c compliant Role of usage...
- Page 4 If in rare situation you find it cannot work with the HSW44C Plus, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.
-
Page 5: Dip Switch
If in rare situation you find it cannot work with the HSW44C Plus, please use any +5V power adapter to plug in the To learn the EDID of HDMI display for respective HDMI source devices, power jack and see if it can work. -
Page 6: Ir Pass-Through
HSMR Plus IR RECEIVER: IR receiver connected here can receive all IR command signals from the IR remote controls of HSW44C Plus and all other HDMI source devices. CAUTION! Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. -
Page 7: Hardware Installation
3. Connect each TMDS output on the HSW44C Plus to respective TMDS input on the remote GRUNDIG CODE receiver HSMR Plus 4. Connect IR blaster to the HSW44C Plus and direct the IR blaster to point towards the SONY 12 BIT CODE built-in IR receiver of the HDMI source devices SONY 15 BIT CODE 5. -
Page 8: Operation And Ir Control
Operation and IR Control Method C: Software Control through RS-232 or Ethernet port Source Side Method A: Push-in Button 1. Use the “+” or “—“ channel button on output channel to select which port to be changed. “+”: change selected output port in ascending order “—“: change selected output port in descending order 2. - Page 9 For example 3. Linkage button Click Linkage button to read back all status. Rename the Input1 to "Blu-ray player", Input2 to "Sat. receiver," input3 to "Game console," input4 to "AV receiver," input5 to "HDMI camcorder," ... etc., and rename output1 to "Conf. RM1," output2 to "Conf. RM2," output3 to "Lobby," output4 to "Main 4.
- Page 10 6. Fast Select button 7. Output Port Pull down menu and select which source to be sent to this output port. Click Fast select button. Quick setting. One by one setting Input one > Output Port one On main menu screen Input two >...
- Page 11 Display Side Command Set COMMAND ACTION COMMAND ACTION Method A: Push button for switching input channels System Status Firmware Version Press the INPUT SELECT push button to switch the input source on the respective output Output A select Input 1 Output C select Input 1 port connected to the matrix receiver in sequential order.
- Page 12 IR Discrete Code Custom Code — IR4 Code: 0x13 0x31 Default Custom Code — IR2 Code: 00 FF Output 1 Output 2 Output 3 Output 4 Source 1 0xAE 0xBE 0xCE 0xDE Function POWER 0x17 0x02 0x0A 0x0C Source 2 0xAD 0xBD 0xCD...
-
Page 13: Edid Learning
EDID Learning Method 2: Use the front panel of the master unit Button Function The EDID learning function is only necessary whenever you encounter any display on the HDMI output port that cannot play audio and video properly. Because the HDMI Output EDID will read from display via connected source devices and displays may have various level of capability in playing audio and... - Page 14 8. The HSMR Plus has been tested extensively and found that it doesn't require external power supply. If in rare situation you find it cannot work with the HSW44C Plus, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.
- Page 15 HSW44C, HSW44C PLUS, HSW88C, HSW88C PLUS RJ45 Configuration: T568 B And Pin Out Signal’s The quality of output video is not good enough, how can I do? P lease adjust t he 8-level equalization on the receiver units. The HDMI s ignal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance.
-
Page 16: Warranty
CE labs can support many areas of your audio and video distribution needs We manufacture: • Digital Signage software and Media Players • HD Matrix Switchers • RF amplifiers • HDMI and Component HD distribution amplifiers • CAT 5 Signal Extenders •...