Table of Contents
Advertisement
Quick Links
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at
www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
Document: HSW88C_manual.pdf
HSW88C
8x8 HDMI over CAT5 Matrix
with IR Pass-through
Advertisement
Table of Contents
Related Manuals for Cable Electronics CELABS HSW88C
Summary of Contents for Cable Electronics CELABS HSW88C
- Page 1 See our full product line at www.celabs.net WARRANTY Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time.
- Page 2 SAFETEY NOTICE The HSW88C v1.3 8x8 HDMI over CAT5 Matrix with IR Pass-through has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the HSW88C should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
-
Page 3: Output Port
7. Output Port: Pull down menu and select which source to be sent to this output port. One by one setting On main menu screen. First select input source. Then select the output ports which you want to send the video and audio from this source. - Page 4 FEATURES • State-of-the-art Silicon Image (Founder of HDMI) chipset embedded for upmost compatibility and reliability • HDMI 1.3c compliant • HDCP compliant • Allows any source to be displayed on multiple displays at the same time • Allows any HDMI display to view any HDMI source at any time •...
-
Page 5: Specifications & Package Contents
Method C: Software Control Through RS-232 or USB Software Control Menu Input & Source indicator 1. Scan button: Serial Port Scan: Press Scan button, the computer will scan the all com port and display them. Select the RS232 serial port connected to the Matrix switch. And set device ID 255 is for all device. -
Page 6: Display Side
Mechanical HSW88C 440 x 290 x 44mm [1’5” x 11.4” x Model 1.7”] Dimensions 528 x 398 x 130mm [1’9” x 1’4” x Package (L x W x H) 5.1”] Model 3250g [7.2 lbs] Weight Package 7.1 kg [15.6 lbs] Mounting 1U rack-mount with ears Power supply... -
Page 7: Channel Control
CHANNEL CONTROL SOURCE SIDE Method A: Push Button 1. Use the switch button on output port to select which port to be changed. (+) increase (–) decrease 2. Push the switch button on Input channel. The source will be sequentially changed. After few seconds, the setting will be active. Method B: IR Remote Control a. -
Page 8: Hardware Installation
1 2 3 1.+5V DC: Spare power jack for over 60m transmission when the RX may need external power to work*. 2. TMDS: Plug in the CAT5 connected to the respective A/V SIGNAL port on the HSW88C 3. DDC: Plug in the CAT5 connected to the respective DDC port on the HSW88C 4. -
Page 9: Dip Switch
Definition of IR Earphone Jack 1 = Power 2 = IR signal (38KHz) 1 = IR signal (38KHz) 3 - Grounding 2 = Grounding The IR extension cables are standard market configuration. You can buy From CE labs if necessary for replacement use. Supported IR Data Format Data Format Suitable... - Page 10 SW Main for firmware update (for technical support only) DIP Switch Position Pin#1 Normal Operation Mode [via RS-232 port] OFF[ ] Normal Operation Mode [via USB port] OFF[ ] Block A [main] ON[ ] Firmware Update Block B [remote] ON[ ] Mode Block C [HDMI] ON[ ]...