Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at
www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
Document:
SW404HD_SW808HD_manual.pdf
SW404HD | SW808HD
High Definition Matrix Switch
Advertisement
Table of Contents
Related Manuals for Cable Electronics CE labs SW404HD
Summary of Contents for Cable Electronics CE labs SW404HD
- Page 1 See our full product line at www.celabs.net WARRANTY Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time.
- Page 2 Supported Output Port (ACK Type C) BEFORE YOU USE THE SYSTEM SOP7 SOP6 SOP5 SOP4 SOP3 SOP2 SOP1 SOP0 Bit = 1 if output port is supported, else 0 Supported Input Port (ACK Type C) SIP7 SIP6 SIP5 SIP4 SIP3 SIP2 SIP1 SIP0...
- Page 3 ACK Byte Matrix System Packing Matrix Host Installation ACK Byte (ACK Type A, B, and C) Matrix System Front/Rear Panels: Model SW404HD Front/Rear Panels Model SW808 HD Front/Rear Panels Matrix and Peripherals Connection Accept Reserved Reserved Machine ID (5-bit address)
-
Page 4: Matrix System
The RS-232 and RS-485 communication ports enable Variable Reserved Instruction Code (6-bit command) convenient communication with remote control equipment. This Length manual describes the SW404HD and SW808HD models. VAR: Variable Length 0: The command packet is 4 bytes with Output and Matrix System Models Input bytes... -
Page 5: Command Packet
PROTOCOL DESCRIPTION MATRIX SYSTEM FRONT/REAR PANELS Command Packet Model SW404HD Front/Rear Panels Command packets are sent to the Matrix Switch from a computer and are 4 or more bytes long depending upon the instruction code. Command Type A Address Instruction Code... -
Page 6: Matrix And Peripherals Connection
APPENDIX Matrix Switch Communication Protocol The RS-232/RS-485 communications are half-duplex with variable byte count packets. For RS-232, the matrix switch operates as a DCE device and therefore can be connected using a straight cable to a DTE device such as a computer. The RS-232 connector is a DB-9 female. For RS-485, a discrete wiring connector is provided for custom connection to any RS-485 equipment. -
Page 7: Input/Output Jacks
The model numbers of the matrix systems describe between the input signal equipment and the matrix equipment is too large, hot plug the number of input/output connectors. Example: Model SW404HD has could easily cause damage to the matrix switches. Turn off power to the system before 4 input sets and 4 output sets. -
Page 8: Connection Method
The audio inputs and outputs can be separately connected to audio Model signal connectors of video recorders and multiplexers. Parameters SW808HD SW404HD Use the RCA cables for connecting AV equipment to the matrix. Connect Video the video and audio connectors of the signal source equipment output Enhancement 0-dB terminals to the same channel connector of the matrix input terminals. -
Page 9: Exit Function Description
EXIT FUNCTION DESCRIPTION RS-232 Communication Port Connection Methods Used to exit the operating software. The RS-232 port is a 9-pin female connector. The pin functions are shown in the following table and connections in the Illustrations below: Note: The Matrix RS-232 port is defined as DCE. OTHER USAGES Displays the presently saved switching status as shown below: Description... -
Page 10: Rs-485 Communication Port Connection Methods
RS-485 COMMUNICATION PORT CONNECTION DISCONNECT ALL: COMMAND FUNCTION DESCRIPTION METHODS Use this command to close all the switching paths at one time. Press The RS-485 port will control more than one product. The RS-485 Port the Disconnect all key to close connection to all input and output ports. is shown below. - Page 11 Example: Close the output ports 03, 05, and 06. ON/OFF Switch Settings Software ID Step 1: First press down the output number keys 03, 05 and 06 ID Address ON/OFF Address to the right (Binary) (Decimal) SW4 SW5 (Hexadecimal ) Step 2: Press the Disconnect key 01001 Step 3: Press the previously pressed output number keys 03, 05...
-
Page 12: Matrix System And Control System Connection - Rs-232
Disconnect Function Keys MATRIX SYSTEM AND CONTROL SYSTEM Close all the unused output ports. CONNECTION - RS-232 PC RS-232, multi-Matrix (up to 32) connections are as shown below. A specific example of operation is described below: The default input and output relations are shown below: NOTES: 1. -
Page 13: Matrix System And Control System Connection - Rs-485
MATRIX SYSTEM AND CONTROL SYSTEM Step 2: First select the Output number keys 02, 03 and 05 to the CONNECTION - RS-485 right, and select the Input number key 01 to the bottom. Then, consecutively press the previously selected Output number keys 02, 03 and 05 (or press the Deselect all PC RS-485, multi-Matrix (up to 32) connections are as shown below. -
Page 14: Input/Output Switching Key Operation Mode
MATRIX CONTROL PANEL OPERATIONS Use the lower scroll bar to view additional columns Input/Output Switching Key Operation Mode The front panel keys of the Matrix system are used for fast audio/video switching (for ils refer to the Front Panel Key Functions). Operation Operation consists of three basic steps: •... -
Page 15: Matrix Application Software
Software Introduction The (AV Matrix) Matrix control software is used to remotely configure Implement all output selection keys via one or more of the SW404HD or SW808HD matrix switches. certain input route. Software Description Example: First press the ALL key, then... -
Page 16: Operation Examples
OPERATION EXAMPLES Operation Example 2 Example 1: Synchronously connect the number 1 audio/video input signals to the number 3 and 4 output channels (Audio and Video LCD Display Operation 4. Press the OUT number 3 enabled). key (output channel). 5. When the Video LCD OUTPUT Operation Example 1 number under the 3 on...