@Xi Computer Corporation MTower User Manual page 61

want to keep the slot cover in case you remove the expansion card at a later
time.
6. Insert the card into the expansion slot, applying even pressure to both ends of
the card.
7. When the card is seated in the slot, gently press down firmly to secure it in the
slot.
8. Use the screw you removed in step 5 to secure the expansion card to the back
panel.
9. Attach any cables to the expansion card according to the instructions in the
manual that comes with the expansion card.
10. Replace the system unit cover.
11. Then reconnect the power cable and any cables you removed earlier.
12. Turn on your computer.
If you need to install a driver for the new expansion card, follow the instructions in
the manual that comes with the card and respond to any on-screen prompts to
complete the installation procedure.
Xi® MTower™ - NTower™ - NetRAIDer™
Page 53