Unpacking The Boxes - @Xi Computer Corporation MTower User Manual

Xi® MTower™ - NTower™ - NetRAIDer™

Unpacking the Boxes

Before you unpack your new computer and accessories, review the packing lists
which are located on the outside of each box. As you unpack a box, make sure it
contains all of the items on the list. If any item is missing or damaged, please
contact @Xi Computer Corporation immediately. See "Contact Information" on
page 81 for information on how to contact @Xi Computer Corporation.
At the top of the system box is an accessory box that contains the keyboard,
mouse, power cord, as well as the software and driver diskettes and
CD–ROMs. Compare the contents of the accessory box against the packing list on
the outside of the system box.
Underneath the accessory box is the system unit. The system unit is wrapped in
cellophane and has foam cushioning at the corners to protect it during shipping.
Follow these steps to unpack the computer system unit:
1. Make sure the open computer box situated flat on the floor.
2. Place one foot on each side of the system unit box to hold it steady.
3. Lift up the system unit slowly and evenly until it is completely removed from
the box.
4. Set the system unit on a flat surface in the location where you intend to use it.
See the section "Selecting the Proper Environment" on page 8 for tips on selecting
the location.
If you ordered a monitor, open its box, carefully remove the monitor, and set it
aside for now. This box also contains the power cables, the driver diskette for the
monitor, and a removable base if the type of monitor you ordered comes with one.
If you received additional boxes with your new computer (such as those for
speakers or software packages), open these boxes and set the contents aside for
now.
Be sure to keep all boxes and packing materials in case you need to move or ship
any the computer system elements in the future.
Page 7