Advertisement
Quick Links
INSTRUCTIONS FOR MODELS
FILTRO SHUTTLE 5.6kW
(P/N: 1000650 – 5.6kW and 1000651 – 2.8kW)
MINI SHUTTLE
(P/N: 1000655 – 5.6kW and 1000656 – 2.8kW)
Water Pressure : 5 - 50 psi (min.-max.)35 - 345 kPa (min.-max.)
Water Flow Rate : 2 Litres per minute minimum.
Marco Beverage Systems Limited.
63d Heather Road,
Sandyford Industrial Estate,
Dublin 18.
Ireland Tel: +353 (0)1 295 2674
Ireland Fax: +353 (0)1 295 3715
email: sales@marco.ie
www.marco.ie
(P/N: 1000650MJ – 3.6kW 200V)
Marco Beverage Systems Limited.
Shire House, Strixton Manor,
Strixton, Wellingborough, Northants,
NN29 7PA
UK Tel: +44 (0)2072 744 577
UK Fax: +44 (0)2079 788 141
email: sales@marco-bev.co.uk
www.marco-bev.co.uk
Advertisement
Related Manuals for Marco FILTRO SHUTTLE 1000650
Summary of Contents for Marco FILTRO SHUTTLE 1000650
- Page 1 (P/N: 1000655 – 5.6kW and 1000656 – 2.8kW) Water Pressure : 5 - 50 psi (min.-max.)35 - 345 kPa (min.-max.) Water Flow Rate : 2 Litres per minute minimum. Marco Beverage Systems Limited. Marco Beverage Systems Limited. 63d Heather Road,...
- Page 2 Electrical Installation Procedure: 1000651 / 656 - 2.8kW/230V ac – plug into a suitable 13A supply is required. 1000650- / 655 - 5.6kW/230V ac - This unit must be connected to a suitable 30A single phase power supply. This should be done by a qualified electrician. ...
- Page 3 Ensure your Urn is in place under the basket and that the hole in the basket is lined up with the centre of the urn’s inlet funnel. The Filtro Shuttle is designed to accommodate the Marco Urn, Part number “1700174 Insulated Urn 6L Shuttle” ...
- Page 4 Fitting a scale reducer is recommended, especially in hard water areas. A service agent should descale the machine regularly. Marco suggest that the machine be descaled every 3 months if the unit is in a hard water area. In soft water environments every 6 months should suffice.