Do you have a question about the FILTRO and is the answer not in the manual?
Questions and answers
Jan Andreou
April 30, 2025
machine is drawing power but not switching on
1 comments:
Mr. Anderson
May 16, 2025
The Marco FILTRO machine may be drawing power but not switching on because the system is overloaded. It should be connected to a suitably rated power supply.
The information provided in this manual is intended to assist in the installation and maintenance and service of the Manual-Fill versions of the Filtro Filter coffee Brewer. Please read the instructions carefully to prevent accidents and ensure an efficient installation.
At the end of the process the ‘Brew Ready’ light will illuminate and the buzzer will sound. Only half of the water will have transferred to the jug/flask and the remainder will stay in the machine. Service Manual 1000615 Filtro Jug MF 1000616 Filtro Flask MF 02-05-06 Page 3 of 9...
Leave the lid of the tank open. Switch off the machine after one minute. Service Manual 1000615 Filtro Jug MF 1000616 Filtro Flask MF 02-05-06 Page 4 of 9...
Page 5
Jug/Urn Cleanser. The Filtro is designed with a spray head which can be easily removed by hand for cleaning or de-scaling - the bayonet type of fixing can be simply twisted in and out of position. Ensure that the spray head is securely in place when replacing it.
Need help?
Do you have a question about the FILTRO and is the answer not in the manual?
Questions and answers
machine is drawing power but not switching on
The Marco FILTRO machine may be drawing power but not switching on because the system is overloaded. It should be connected to a suitably rated power supply.
This answer is automatically generated