Add Ip Cameras - Provision ISR NVR-4100P User Manual

4

Add IP Cameras

This chapter mainly introduces how to connect multiple IP cameras through NVR. Once you
finish adding IP cameras, you can see the live images through the monitor of the NVR. For 4
CH NVR, you just need to directly connect the IP cameras to the device through PoE network
ports. The live images will display after you connect successfully. Of course, if there are free
channels, you can connect the IPC via WAN/ LAN network. For 8/16 CH NVR, you may
connect the previous 4 CH directly to the NVR through PoE network ports and then add the IP
cameras for the remaining channels into the NVR via WAN/LAN. Here we will introduce how
to add cameras through WAN/LAN.
To add IP cameras via LAN:
Step 1: Please enter MenuIP Camera tab. Refer to Fig 4-1. Click "Search" button to search
the devices in the same network.
Fig 4-1 Device Management
Step 2: Enter into the search tab. Click "Refresh" to refresh the searched devices. You can
modify the IP address of the searched device by checking the device and clicking "Setup"
button.
Fig 4-2 Search Devices