Turning On/Off The Scanner - Kodak ScanMate i940M User Manual

Turning on/off the scanner

• To turn the scanner on: open the top cover. When you turn on the
scanner, the green indicator on the front of the scanner will flash as
the scanner goes through a series of self tests. When the green light
is steady, the scanner is ready.
Do not disconnect the AC power cord while the cover is open.
• To turn the scanner off: close the top cover. It is recommended that
you keep the top cover closed when the scanner is not in use. By
default, if the scanner is on and left idle for more than 60 minutes after
the scanner goes into Energy Star mode, the scanner will power off.
To power the scanner back on, close the cover and then open the
cover.
A-61800 July 2013 9