DICE Car Integration Kit for iPod Integration Manual page 81

Content Identifier
DICE interface for iPod
Installation Guide/User Manual
user manual
iPod docking
vehicle specific
interface module
Connection Diagram
Self Install:
To cigarette
lighter
power
adapter
Pro Install:
To radio antenna port
factory antenna connector
+ 12
ground
ignition
Installation Tips / Check List
Frequency configuration settings:
ON/OFF Switch Positions
Interface unit
ON 1 2
frequency
selector
Note:
1. Disconnect the vehicle harness from module and cycle ignition off for 5 seconds after changing
the switches.
2. Try to select a transmitting frequency that is not occupied by a local FM radio station.
With the Pro-install kit, easy access to 12V constant/switched power can be found at the 12V DC outlet.
If T-taps are being used for splicing power/ground, make sure the correct size T-taps are used so it has
good contact with the wiring. Loose wire will cause unexpected operation.
for Self Install kit:
cable
plug and play antenna/ power adapter
(Not available outside US/Canada markets)
antenna
wire
pro-install antenna
/power cable
OFF
ON
1 2
for Pro Install kit:
pro-install antenna/power cable
module
iPod docking
cable
module
iPod docking
cable
FM (MHz) Dip switch 1
88.7 OFF
93.3 ON
97.5 ON
107.7 OFF
iPod
MENU
iPod
MENU
Dip switch 2
OFF
OFF
ON
ON
80