DICE Car Integration Kit for iPod Integration Manual page 44

Operation Overview
2
1 Source selector
2 Press to change Track
3 Press to change modes.
Press to RW or FFW.
4
Mazda Specific Technical Notes
Cannot select the interface.
Radio/ steering wheel controls do not operate
iPod.
No text display.
Text not showing or cannot cycle between text
fields.
iPod does not charge.
Radio continues to display "UPDATING" for
more than one minute.
Unexpected operation in SAT mode.
43
CDC emulation
1
PUSH
PWR
4
Problem
www.diceelectronics.com
3
2
3
Source selector
1
2 Next / Previous track. Double-click
to change modes.
3 Press to toggle between available
text fields. TURN to scroll text.
Solution
Check DIP switch settings. With the ignition OFF disconnect vehicle harness
from module for a few seconds and reconnect. Verify that the correct button is
used to access the interface. 2004 Mazda6 may require radio modification to
accept external CD changer connection.
Reset iPod and make sure most recent iPod firmware is installed. Check vehicle user
manual on how steering wheel controls work. Not all Mazda vehicles support track
changing from the steering wheel.
Make sure DIP switch settings are correctly set for text display.
On some Mazda vehicles (Mazda 6), the DISP button is used for cycling the
different text fields. Also check dip switch settings.
Check all connections. Reset iPod and make sure iPod charges while connected to
computer or wall charger.
Turn the power off to the radio and then back on again.
The control interface in SAT mode is very different from the interfaces used on other
vehicles, please carefully check the user manual.
1-888-342-3999
SAT emulation
1
SAT
PUSH
PWR