DICE Car Integration Kit for iPod Integration Manual page 43

(About Dip Switch Settings continued)
for i-Mazda-R2 (SAT) kit:
Car configuration switches
Single text fields
(recommended for non-navi radios)
OFF OFF
Default
This is the recommended
setting for Non-Nav radios.
In this setting the Name and
Title text fields displays
identical song information.
(Song name*Album*Artist)
Only Short Scrolling can be
selected in Preset 6.
Connection Diagram
Mazda Radio with CDC/SAT port
Mazda CDC/SAT
connector
Installation Tips / Check List
On the CX-9, the trim pieces around the radio/dash and console need to be popped off first; then you
access the screws holding the radio.
The Mazda3's center console pops up with clips. The shift knob can be removed by rotating it
counter-clockwise.
To enhance the user experience, it is recommended to set the iPod configuration switches to iPod mode on
non-text capable radios as this configuration will keep the direct iPod controls unlocked.
Dual text fields
(recommended for navi radios) (recommended in SAT emulation) (recommended in CDC emulation)
ON ON
This setting is recommended
for Navigation radios or for
Non-Nav radios when
manual scroll feature is
preferred.
In this setting, the Title text
field will display "Album *
Artist" and the Name text field
will display "Song name".
Both Short scrolling and Long
Static can be selected in
Preset 6.
radio location
module
iPod configuration switches
Selected emulation
"Locked"
OFF OFF
Default
It is best selected when It is best selected when text
controls from the radio are display is NOT supported
preffered. Use this mode to by the radio. Track numbers
browse within the contents of and times are not
the iPod by category. synchronized between the
iPod and radio. Because
there is less data transfer
between the iPod and radio,
this mode has the fastest
response time. Content is
selected on the iPod.
iPod
iPod docking
cable
"iPod"
ON ON
MENU
42