DICE Car Integration Kit for iPod Integration Manual page 49

Connection Diagram
for D2B kit:
head unit
TX
for MOST kit:
to navigation system
to car side
Installation Tips / Check List
For D2B kit, if the CD changer is present in the vehicle, please follow the steps below:
Head Unit
TX RX
Amplifier
RX
TX
TX RX
Disconnect the connector
from the CD changer
Installation can sometimes easily be done at the CD changer location. Since the CD changer is
disconnected anyway, the integration can take place there.
radio location
module
Abilit.
12Vdc
Gnd
RX
interface module
Head Unit
TX RX
Amplifier
RX
TX
RX
TX
Open the connector
and extract the fibers
Note: further instruction in the installation tips/check list
iPod
MENU
12Vdc ground
Head Unit
TX RX
Amplifier
RX
TX RX
Use the couplers to connect
the OEM lens to the interface lens
interface
RX TX
iPod
MENU
AUX cables
TX Conected to the interface
48