Fm-Rds Universal Integration - DICE Car Integration Kit for iPod Integration Manual

Benefits of the DICE AUX kit
• 5V USB iPod charging is supported as well as the original 12V firewire charging
• Signal conditioning is implemented that removes noise from the iPod
• Connect any other audio device to AUX input
• When the iPod is disconnected, an automatic switch initiates the auxiliary input on the DICE module
• Dual potentiometers are integrated into the DICE module for setting desired iPod and AUX audio levels
Operation Overview
Using the AUX integration
Connect the iPod to the dock cable and select the auxiliary source on the radio. The charging indicator should appear on the iPod
and a selected song will start to play. If an additional audio device is connected through the 1/8" mini-jack, it will become active
when the iPod is disconnected.
1
AM CD
FM AUX
VOL
COMPACT
PUSHPWR
DIGITAL AUDIO
SEEK
SKIP
REW
1
1 AUX source selector
NOTE: Some vehicles require the ignition to be in the on position to provide
ACC power. In this case the interface unit will not function until ignition is
turned on.
Auxiliary Specific Technical Notes
Problem
iPod and auxiliary input sound levels are much
different.
iPod will not stop charging if left connected
with the vehicle shut off.
Auxiliary device is connected to the 3.5mm
mini-jack, but the iPod continues to play.
CLOCK
PLAY/PROG FF NR DISC-
2 3 4 5
H M
Adjust sound level through potentiometers on DICE module.
Make sure the ignition wire (REM) is attached to a 12V switched source so that the
DICE unit receives a shut-off signal.
The iPod must be disconnected for the auxiliary input on the DICE module to be
activated.
DISC
SCAN TUNE
RPT
PUSHMODE
2:42
A.SEL
RDM
MENU
DISC+
6
R
Solution
Song Title
Artist Name
Album Name
1 of 12
-1:16
76