Rear Wheel Adjustments; Seat Depth - Quickie User Instruction Manual & Warranty

34
T. REAR WHEEEL ADJUSTMENTS
1. Seat Height Adjustment
a) Remove the real wheel (See Quick-Release Axle).
b) Remove the bolts (A) from the axle sleeve
bracket (B).
c) Raise or lower axle sleeve bracket to desired
height.
d) Additional seat height adjustment may be made
by flipping axle sleeve bracket top to bottom (as
shown) and exchanging them from side to side.
e) Replace and tighten bolts. Replace wheel.
NOTE– Reversing the axle sleeve brackets from side to
side may affect wheelbase width (see Wheelbase
Width).
2. Wheelbase Width Adjustment
a) Remove the real wheel (See Quick-Release Axle).
b) Remove the bolts from the axle sleeve bracket
(A) on each side of the chair.
c) Reverse the axle sleeves (A) with the wide side
(B) facing away from the chair for increased
width.
d) Replace and tighten bolts. Replace wheel.
NOTE– To retain the same height, you must exchange
the axle sleeve brackets from side to side.
930575 Rev. A
I X . S e t - u p & A d j u s t m e n t
B
A
B
A
B
Axle Sleeve Bracket
I X . S e t - u p & A d j u s t m e n t
U. SEAT DEPTH
1. Pivot Plate Adjustment
a) Remove the bolts (A) securing the back rest
pivot plate (B) onto the tilt seat tube.
b) Position the backrest pivot plate in the desired
pre-drilled holes on the tilt seat tube.
c) Replace bolts and tighten securely.
NOTE– A rear frame extension is available for 15" and
16" depths from your authorized Sunrise supplier.
2. Tilt-in-Space Tube Adjustment
a) Remove the bolts (A) from the tilt brackets and
strut saddles.
b) Move the tilt seat tube (B) to position the
A
proper frame holes according to the matrix (C)
for the tilt bracket.
c) Replace and tighten bolts.
NOTE– Adjusting the position of the tilt seat tube will
affect the chairs center of gravity and may
require you to adjust the casters to a trailing or
forward position (see Caster Forks above).
Depths (in.)
Frame
Depth
13
14
15
16
17
18
19
20
Hole Positions
Solid Seat Back Plate Pivot
Depth Position Position
11 2+4 1
12 3+5 1
13 4+6 1
14 5+7 2
15 6+8 2
16 7+9 2
17 8+10 3
18 9+11 3
35
B
A
Seat Depth Adjustment
Tilt-in Space Adjustment
MechLok Strut Rear Strut
Position Tube Position
A 6
A 7
A 8
B 9
B 9
B 10
C 11
C 7
930575 Rev. A