Bosch AMAX 2100 User Manual page 8

8 en | Introduction
Keypad Indicators
Keypad Indicator
Icons
1 2 3 ....
ZONE (1-8)
AWAY
STAY
MAINS
FAULTS
2014.01 | 02 | F.01U.295.569
Status
on
off
Fast flash (0.25 seconds lights on/
0.25 seconds lights off)
Slow flash (1 second lights on/1
second lights off)
on
off
Slow flash (1 second lights on/1
second lights off)
Fast flash (0.25 seconds lights on/
0.25 seconds lights off)
on
off
Slow flash (1 second lights on/1
second lights off)
Fast flash (0.25 seconds lights on/
0.25 seconds lights off)
on
Slow flash (1 second lights on/1
second lights off)
on
off
Flashes
on
User Guide
Definition
Zone is triggered.
Zone is normal.
Zone was alarmed or is in alarm
status.
Zone is manually bypassed or
interior Zone is in STAY arm mode.
System is armed in AWAY mode.
System not armed in AWAY mode.
Exit time.
Programming mode or Code
function mode. STAY indicator
flashes simultaneously.
System is armed in STAY mode.
System not armed in STAY mode.
Exit time.
Programming mode or Code
function mode. AWAY indicator
flashes simultaneously.When
bypass function is performed, the
STAY indicator only flashes.
AC main power is normal.
AC main power supply failed.
System fault or Tamper condition
is present.
System is in normal status.
System fault or Tamper condition
must be acknowledged.
System is disarmed.
Bosch Sicherheitsysteme GmbH
AMAX