Bosch AMAX 2100 User Manual page 9

AMAX
Keypad Sounds
Sound Indicator
One short beep
One single one- second beep
Two short beeps
One short beep every minute
One short beep every two seconds
Continued sound
Continuous 0.5 second beep, stops
0.5 seconds
Bosch Sicherheitsysteme GmbH
Definition
A keypad button has been pressed.
The requested operation is refused. Incorrect
operation signal.
The system accepted the code. The system executed
the requested function.
Fault tone, unacknowledged system failure.
Exit time started.
– Last 10s on exit time
– Keypad fault/tamper sound (fault/tamper to be
acknowledged)
– Keypad alarm sound
Entry delay time (until alarm ends or system is
disarmed).
User Guide
Introduction | en 9
2014.01 | 02 | F.01U.295.569