Instructions For Your Health - Medisana GlucoDock Instruction Manual

Blood glucose module
Table of Contents

Advertisement

• Make sure to comply with the operating conditions of 10 °C
to 40 °C and storage conditions of 2 °C to 30 °C at max.
90% relative humidity.
• Extremely high humidity can affect the test results. A
relative humidity of more than 90% can cause
incorrect readings.
• The device is not suitable for altitudes of over 3,000 m.
• Store the module, the test strips, the lancets and the
lancing device out of reach of children and pets.

2.2 Instructions for your health

This blood glucose test system is designed for
actively testing the blood glucose of persons
at home. The reading from a blood glucose test
system for self-monitoring does not replace a
professional test performed in a laboratory.
Do not change any treatments as a result
of your blood glucose reading without first
consulting your doctor.
• The measuring system is intended for external use
only (in vitro).
• Only use fresh, capillary whole blood from the finger
tips for the test.
• Your monitor only requires one small drop of blood to
perform a test. You can draw one from a finger tip. Use
a different place for each test. Repeated lancing in the
same place can lead to infection and numbness.
• Test results below 3.3 mmol/L (60 mg/dL) are an
indication of hypoglycemia, meaning the blood glucose
level is too low. If the reading is above 13.3 mmol/L
(240 mg/dL), symptoms of a high blood glucose level
(hyperglycemia) can occur.
2 Safety Information
9
GB

Advertisement

Table of Contents
loading

Table of Contents