Medisana GlucoDock Instruction Manual page 10

Blood glucose module
Table of Contents

Advertisement

2 Safety Information
• The GlucoDock blood glucose measuring system can
measure in either mg/dL or mmol/L.
• The unit is only to be used for the specific purpose
described in this instruction manual.
• Any misuse will void the warranty.
• Only use the accessories which have been recom-
mended by the manufacturer (test strips, lancets,
control solution) with this module.
• This system is not designed to be used by persons
(including children) with limited physical, sensory or
mental abilities, or by persons with insufficient
experience and/or knowledge, unless under observation
by a person responsible for their safety, or unless they
have been instructed in the use of the device.
• Children must be supervised to ensure that they do
not play with the device.
• Do not use this blood glucose measuring device to
test seriously ill patients.
• Do not operate the device in the vicinity of high-
frequency transmitters, e.g. microwave and short
wave transmitters.
• Do not use the device if it is not working correctly, if
it has been dropped or has fallen into water or has
been damaged.
• Protect the module from moisture. Should moisture
enter the unit, stop using it immediately. Contact
your authorised service centre.
• If a fault occurs, do not try to repair the unit yourself.
Attempts to do so will void the warranty. Refer all
servicing to authorized service personnel.
• Always keep the module clean and store it in a safe
place. Protect the monitor from direct sunlight to
prolong its service life.
• Do not store the monitor and the test strips in a
vehicle, bathroom or refrigerator.
8
GB

Advertisement

Table of Contents
loading

Table of Contents