Sony NSR-500 Series Installation Manual page 32

5
Register users.
If you do not want to register users,
select [Skip configuration] and click
[Next], and proceed to step 6.
1 Select [Configure], and click
[Next].
The User Management screen
appears.
2 Click [Add].
The Add User screen appears.
3 Configure each setting, and click
[OK].
32 Step 3: Settings
User Name
Enter the user name that will be
used to log onto the NSR. The name
can be up to 32 characters long and
consist of alphanumeric characters,
hyphens (-), and underscores (_).
User names are case sensitive.
Password
Enter the password that will be used
to log onto the NSR. The password
can be up to 32 characters long and
consist of alphanumeric characters,
hyphens (-), and underscores (_).
Passwords are case sensitive.
Confirm Password
Reenter the same password for
confirmation.
User Level
Select the permission level to grant
the user.
You can only select user level 3 or
4 here.
For details on user levels and
permissions, refer to the User's
Guide (PDF).
The user is added to the list in the
User Management screen.
4 Click [OK].
Proceed to "6 Open Ports for
External Network".