Sony NSR-500 Series Installation Manual page 22

Connections to remote clients
When a remote client is necessary, you can
use the RealShot Manager Advanced client
software supplied with this unit.
• Use the version of RealShot Manager
Advanced supplied with this unit. For
details on how to download the installer
for RealShot Manager Advanced, see
"Downloading the Operating
Instructions and Tools" (page 10). For
details on installation and connecting to
the NSR, refer to the RealShot Manager
Advanced Installation Guide (PDF).
• RealShot Manager Advanced client
software operates on Windows
computers. For details on recommended
system specifications, refer to the release
notes included in the install archive for
RealShot Manager Advanced client
software.
• When using RealShot Manager
Advanced as a remote controller for the
NSR, select [Client] during installation
of RealShot Manager Advanced.
• When connecting to the user area
network, use LAN connector 2.
• For details on NSR settings when using
the RealShot Manager Advanced client
software, see "Configurations for Using
RealShot Manager Advanced Client
Software" (page 38).
Connecting an Analog
Camera (when NSBK-EB05
(Optional) is Mounted)
Use the analog camera input cable supplied
with the NSBK-EB05 (optional) to connect
the analog cameras.
To control pan, tilt, and zoom operations,
connect a camera control cable to the
RS-232C 2 connector or the RS-422/485
connector (four rightmost pins on the alarm
output connector). (Only one of these
22 Step 2: Connections
connectors (RS- 232C, RS-422, RS-485)
can be used at any one time.)
Analog camera input cable
Analog camera
connector (black)
Audio device
Connections for controlling
pan, tilt, and zoom
For RS-232C (VISCA)
communication
Configure a daisy chain connection as
follows.
Maximum number of cameras: 7
Analog
camera
PTZ
Analog camera cable
input connector
Video input
Audio input
connector
(white)
To RS-232C 2
connector