2.1 Front Panel
a. Reset: Button for Resetting the router. Please press the Reset Button for
5 seconds and the SYS LED Indicator would be blinking. After 5 seconds,
please un-press the button, the router would restore to factory default
setting and restart automatically.
b. LED Indicators:
LED
Description
Indicator
POWER
Indicating the
Status of the Power
SYS
Indicating the
Status of the
System
Link/Act
Indicating the
Status of WAN and
LAN
100Mbps
Indicating the
TEI480T/490T/4000 Enterprise & Net-bar Level Router
Chapter Two Hardware Installation
Function
When the power LED lights on, the
Switch is receiving power
When the SYS LED is blinking, the
system is working normally.
When the SYS LED lights ON or OFF,
the system is working abnormally.
When the LED lights ON, the
respective port is successfully
connected to the Ethernet network.
When the LED is blinking, the
respective port is transmitting or
receiving data.
When the LED for 100M lights ON, the
7