Virtual Keyboard Installation - Picomed NaturalPoint SmartNav 4 Manual

NaturalPoint SmartNAV Users Manual : Getting Started
drive icon, and double click again on the Setup file, from your computer's My Computer menu.
2. Follow the software installation instructions on the screen.
Note:(Windows may display a warning message about the drivers not being signed. Click YES to
accept the drivers, the drivers WILL NOT harm your system.
3. A new SmartNav icon will appear on your desktop.
4. Connect the SmartNav device to the USB port of your computer and place the unit on top of your
monitor with the front facing the same direction as the monitor screen.
5. The following are special steps for Windows XP users :
6. The Windows XP Found New hardware Wizard should appear once you plug in your SmartNav
.The Wizard will indicate that is has found the NaturalPoint SmartNav, and ask if you would like
Windows to install drivers for the hardware automatically, or choose from a list of drivers in a
specific location.
7. Select Install Automatically.
8. NOTE: A Hardware Driver Install Warning message will appear after you have selected Install
Automatically. Click on the button labeled "Continue Anyway" and Finish. (This WILL NOT
harm your computer).
9. Windows XP will now display a message indicating that it has finished installing the NaturalPoint
SmartNav
10. It is recommended that you restart your computer after installation.
11. If you encounter further problems with this procedure, please consult the trouble-shooting guide at
the end of this manual.
2.3.3 Special Note for XP Users
If you accidentally plugged the SmartNav unit into your computer before loading the NaturalPoint
software and the camera is not working, unplug the SmartNav unit and go through the install procedure as
instructed. After completing all of the above steps, go to the windows xp device manager, click on usb
devices and look for a listing marked unknown usb device. If this listing appears, right click on unknown
usb device and delete it. If the unknown usb device does not appear, you may close the device manager
and begin using the SmartNav.

2.3.4 Virtual Keyboard Installation

SmartNAV AT Users looking for the Virtual On-Screen Keyboard. The On-Screen Keyboard is located on
the same installation disk as the NaturalPoint software. The executables can be found under the keyboard
directory. Double click the My Computer icon from the desktop or open Windows Explorer. Right Click
on the CD-Rom drive and then click Open from the drop down menu. Click on the Keyboard folder and
then click the CNTzip.exe file to install. To install the Word Prediction program, click the Words.exe file.
4/41
07/03/2008 03:35:45 PM