Suggested Alternate Dot Placements - Picomed NaturalPoint SmartNav 4 Manual

NaturalPoint SmartNAV Users Manual : Getting Started
The Grammar File
The above commands are defined in grammar.bnf, a text file that can be edited by the user, these are only
the default values.
You can edit the commands in the grammar.bnf file from within WordPad. Open the file (located in
'C:\Program Files\Naturalpoint\SmartNAV) with Wordpad and change the text that is NOT in quotes.
Remember when changing the speech commands to only change text outside of quotes. Do not change the
order of items, the text in quotes "" or their IDs.
Please let us know if you have any problems.
Note :
Do not plug the microphone in to the jack on the SmartNAV. The input jack on the SmartNAV device is
for input switches, not microphones.
Please see sections 2.3.6 (Voice Clicking Installation) and 4.2.3 (Clicking Tab) for details about how to
enable speech recognition if it is not running.

3.1.7 Suggested Alternate Dot Placements

There are many different locations where the reflective dot can be placed for tracking, here are two
examples.
3.1.8 Status LED indicators
The SmartNAV camera has status LEDs which give the user visual cues about the status of the SmartNAV
software. There are two Status LEDs, one is located on the front directly above the infrared shield, and the
other is on the underside of the SmartNAV camera which will cause the case to "glow" blue when it is
illuminated. Use the following key to interpret what the state and color of the status LEDs mean.
Front Status LED
Off : No object is being tracked, and cursor movement is NOT paused.
◊
◊ Green : An object is being tracked, and cursor movement is NOT paused.
◊ Orange : An object is being tracked, and cursor movement IS paused.
◊ Red : No object is being tracked, and cursor movement IS paused.
11/41
07/03/2008 03:35:45 PM