Software Updates - Picomed NaturalPoint SmartNav 4 Manual

NaturalPoint SmartNAV Users Manual : Getting Started
1. Place the ring on your right index finger if you plan to use your left hand to hit the Hot Keys.
Place the ring on your left index finger if you plan to use your right hand to hit the Hot Keys.
2. The ring should be placed halfway between the first and second knuckles of your index finger.
3. Place the unit on top of your monitor or clip the unit to the top of your laptop screen and aim it at
the keyboard. OR clip the unit to the side of your laptop screen and select 90 degree rotation from
the Advanced Settings menu (described in section 2.4) if the unit is clipped to the right side of the
screen, or 270 degrees rotation if the unit is clipped to the left side of the screen. The unit can also
be placed in front of your keyboard.
4. Place your ring hand on the keyboard and use your other hand to adjust the SmartNav unit. Adjust
the unit until the green indicator light comes on when your ring finger is lifted slightly above the
keyboard.
Use
Raise your finger slightly off the keyboard until the cursor begins to move. Move your finger slowly from
side to side and up and down to get used to the feel of the cursor movement.
Once you get used to the feel of the cursor movement, try increasing your speed setting. The faster your
speed setting, the less you have to move your finger to move the cursor from point A to point B. If you
have difficulty moving the cursor to the top, bottom, or either side of the screen, raise your finger slightly
off the keyboard and press the center key.
Note: It is advisable to use the Data Window to properly align the SmartNav unit with your finger.

6 Software Updates

In order to better serve your needs we continually update the SmartNav software package. You may download
these updates free of charge from www.naturalpoint.com .
To download and install new software, please follow these steps
1. Go to www.naturalpoint.com and click on the Support link at the top of the page, then go down to
SmartNav software.
2. If the version of software listed for your product is more recent than the version of the software installed
on your computer (use the SmartNAV Control Panel : Setup : About button to check your version), then
download and save the updated installer file to your desktop or temp folder. If a newer version is not
available, then there is no need to update your software.
3. Disconnect your SmartNav unit from your computer.
4. Use the "Add and Remove Programs" feature of the Windows Control Panel to un-install your existing
SmartNAV software.
5. Double click on the downloaded installer .exe file to install the new software. After the program icon
reappears on your desktop, you may reconnect the SmartNav to your computer and run the updated
software.
7 Contact NaturalPoint
NaturalPoint
28/41
07/03/2008 03:35:45 PM