Synchronizing Via Infrared And Bluetooth - HTC Apache User Manual

4.3 Synchronizing via Infrared and Bluetooth

You can connect your device to the PC to synchronize using the local wireless
technologies, such as infrared (IR) and Bluetooth. These technologies have almost similar
but slightly differing requirements.
To synchronize with a PC via infrared
1. Follow the instructions in ActiveSync Help on the PC for setting up your PC to receive
infrared beams.
2. Line up the infrared (IR) ports according to the instructions in the manufacturer's
documentation for your device so that they are unobstructed and within close range.
3. On the device, tap Start > Programs > ActiveSync.
4. Tap Menu > Connect via IR.
5. Tap Sync.
To synchronize with a PC via Bluetooth
1. Follow the instructions in ActiveSync Help on the PC for configuring Bluetooth on your
PC to support ActiveSync.
2. On the device, tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via Bluetooth. Make sure that Bluetooth is turned on at the
device and the PC, and that they are within close range.
4. If this is the first time you have connected to this PC via Bluetooth, you must first
complete the Bluetooth wizard on the device and set up a Bluetooth partnership
between your device and the PC.
For more information about enabling and configuring Bluetooth, see Chapter 6.
Note You can also use the Sync Setup Wizard to set up the device to synchronize remotely
with Exchange Server. This wizard is started when you connect your mobile device to
your PC after installing ActiveSync on the PC.
|
52 Synchronizing Your Pocket PC Phone