Familiarization With Motorcycle Before Drive; Control Elements - JAWA Dandy MJ50 Operation And Maintenance Manual

5. Familiarization with motorcycle before Drive

Before first drive it is necessary to familiarize himself with the motorcycle thoroughly and to carry out check of
the whole motorcycle according to Section 6.
5.1 Electric Switch Control
Switch Box
Pilot Lamps
The speedometer lighting - goes on after the start of the engine and indicates the clearance light
function.
Direction indicator pilot lamp - This lamp is flashing, when the direction light change-over switch is in
the right or left extreme positions.
Dimmed light pilot lamp - This lamp goes on after start of the engine and switching on the dimmed
lights. and indicates the dimmed light function.
Distance light pilot lamp -This lamp is on at use of the distance light.
The pilot lamp of separated lubrication of the engine - This lamp indicates minimum amount of oil
(0.5 lt) in the oil tank for separated lubrication of the engine.
The switch box controls ignition and lighting
Position 0 - Electric circuits are opened and it is possible to
withdraw the key.
Position 1 - The electric circuits are closed, the clearance
lights are on, and it is possible to start the engine.
Position 2 - The headlight and tail light are on.
The light change-over switch - serves for switching
over the dimmed and distance lights. Its individual
positions are shown on Figure 7
The direction light change-over switch - serves for
indication of turning on the right (extreme right
position) and on the left (exreme left position). Do
not forget to return it to the central position after the
turning is completed.
The horn - An acoustic signal sounds after pressing
the horn's push-button.
8