Well VP530 User Manual page 56

1. Pick up the handset.
2. Enter the desired number using the keypad.
You can tap
3. Press ,
You can tap the desired number from the list to dial out directly.
By default, the # key is set as a send key. You can set the * key as send key or set
neither of them as send keys. For more information, refer to the
21.
Note
You can also dial using the SIP URI or IP address. To obtain the IP address of your phone,
press the OK key. For example, 192.168.1.15, sip:2210@sip.com. The maximum SIP URI or
IP address length is 32 characters.
Your phone may not support direct IP dialing. Contact your system administrator for
more information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press
Enter the desired number using the keypad.
Press ,
- With the handset on-hook, enter the desired number using the keypad.
Press ,
To place a call using the headset:
Do one of the following:
- With an optional headset connected.
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad.
to open the soft keypad.
, or the Send soft key.
, or the Send soft key.
, , or the Send soft key.
or tap the line key to obtain a dial tone.
Basic Call Features
Key as Send on page
48