Table of Contents
Advertisement
You can also dial the number first, and then choose the way you want to speak to the
other party.
You can dial from the History, the Local Directory or the Favorites. In the dialing
interface, tap
to access the favorites, tap
to access the history. For more information, refer to
and
History Management
During a call, you can alternate between Speakerphone, Headset, or Handset modes
by pressing the Speakerphone key, plugging in the headset, or picking up the handset.
During a video call, you can:
Start and stop the transmission of near-site video
Swap the video windows
View video on the full screen
Your phone displays video in two windows: a small window located on the top-right of
the LCD screen, and a larger window centered in the middle of the LCD screen. By
default, the near-site video displays in the small window, and the far-site video displays
in the window in the center of the LCD screen.
Stop Video/Start Video — You can tap
the transmission of near-site video. When you stop the transmission of near-site video,
the far site will no longer see you.
Swap the video windows — Tap the near-site video window in the top-right side of the
LCD screen to switch the windows the sites display in. The near-site video displays in the
window in the center of the LCD screen, and the far-site video displays in the window
in the top-right side.
Full-Screen — Tap the far-site video window in the center of the LCD screen to
maximize it, the soft keys are hidden. Tap the window again to restore it to previous
position and size.
The call duration of active calls is visible on the LCD screen. In the following figure, the
call to Kate has lasted for 1 minutes and 14 seconds.
To place a call using the handset:
on page 32.
or press the Camera Switch key to start/stop
Basic Call Features
to access the local directory or tap
Contact Management
on page
25
47
Advertisement
Table of Contents
