Page 1
USER MANUAL Model: CD001 Caller ID Phone Thank you for choosing WELL. Please read carefully the following instructions and keep them within reach. Reorder no.: black - PHONE-CORD-CD001BK-WL white - PHONE-CORD-CD001WE-WL...
INTRODUCTION Thank you for purchasing our newest phone with LCD display. This manual is designed to familiarize you with this phone. To get maximum use from your new phone, we suggest that you read this Instruction Manual carefully before operating it. SAFETY INSTRUCTION When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons:...
GETTING STARTED Insert one end of the line cord to the line jack of the base and the other end to the wall outlet of exchanger. The time and date will be display on the liquid crystal screen after the line cord is inserted.
RECEIVE CALLS The unit will ring when a call comes, if you have subscribed caller ID service to your local telecom, LCD will display month, date, time, the incoming call and NEW icon sequentially. If a missed call number comes twice or more times, the REPEAT will be displayed on the LCD. ...
Page 6
Pre-dial function 1. In on-hook state. 2. Dial the desired number, if any mistake, use DEL key to delete. 3. Press REDIAL key, the number will be dialed out. Auto-redial Press key, dial a number, if you hear an engaged tone. Press REDIAL key and the last dialed number will be redialed automatically at every 6 seconds until the line is through.
1. In on-hook or off-hook state. 2. Press OUT key, LCD displays the last dialed number. 3. Press OUT key continuously, LCD displays ...END… after all outgoing numbers are reviewed. Dial back outgoing call 1. In on-hook or off-hook state. 2.
Page 8
5. Press DEL key to quit. Note: If the local area code only 4 digits, the last digit can be left as “-”. After set the local area code, unit will auto-filter the area code if the incoming call number with the first several digits as same as the local area code.
In on-hook state, press MUTE/RING key, LCD display RING 01. Press ▲ or ▼ key to select ring tone. Besides, you can also press MUTE/RING key repeatedly to select the ringer. ONE-TOUCH MEMORY Storing a number into one-touch memory In on-hook state, pre-dial the desired number or review the incoming or outgoing list for the desired number to store.
Page 10
Check if the battery is in low-battery state, change the battery. Battery is in normal state, unplug the telephone line, remove the batteries, and reinstall after 10 minutes. Waste electrical and electronic equipment are a special waste category, collection, storage, transport, treatment and recycling are important because they can avoid environmental pollution and are harmful to health.