Bypassing; Bypassing Zones; Bypassing Faults And Tamper Conditions (Except Zone Tampers) - Bosch AMAX panel 2000 ICP-AMAX-P User Manual

AMAX panel 2000 / AMAX panel 2000 EN
7

Bypassing

7.1

Bypassing Zones

By bypassing Zones, one or more zones are disabled for one arming cycle. After bypassing a
zone, you can arm the system even when a zone is in alarm state.
How to bypass a zone
1.
2.
3.
4.
NOTICE!
If the selected zone is already bypassed, when operating this zone, the bypass from this zone
will be cancelled.
7.2 Bypassing Faults and Tamper conditions (Except Zone
Tampers)
Bypassing Faults and Tamper conditions, one or more faults and tamper conditions are
disabled for one arming cycle. After bypassing a Fault or Tamper condition, you can arm the
system even when a Fault or Tamper condition exists.
How to bypass faults and tamper conditions
1.
Bosch Sicherheitssysteme GmbH
Enter your code and press [9] [#]. The STAY indicator flashes fast.
Enter the zone number you wish to bypass, then press the [*] key.
(If you wish to bypass multiple zones, please repeat step 2).
If you wish to cancel bypassed zone, enter the zone number of the bypassed zone , then
press the [*] key.
(If you wish to cancel several bypassed zones, please repeat step 3.)
Press [#] to exit.
Enter user code + [97] and press [#].
Two beeps sound.
User Guide
Bypassing | en 15
F.01U.249.500 | V4 | 2011.12