Amplicomms PowerTel 30 User Manual page 13

Warning: Ensure that there are no cables or pipes etc. under the surface of
the wall where you want to drill the holes.
Drill two holes whose distance apart corresponds
to the bracket to be used, insert the screws and
allow them to project 5 mm from the wall.
Position the telephone on the bracket, fit the
screws in the slots and slide the telephone down-
wards a little.
Turn the receiver hook (4) in the receiver cradle
180° so that the receiver can be hooked in.
Helpline UK 0844 800 6503
(See page 36 for costs and hours of operation)
G
ETTING STARTED
4
4
4
4
4
9