Standard Equipment; Assembly - RIDGID SeeSnake Micro Operating Instructions Manual

Standard Equipment

The SeeSnake Micro comes with the following items:

Assembly

To Install Batteries (4 AA):
Be sure to read Battery Precautions section on Page 2.
1. Turn the hand-held viewer upside down to expose the battery compart-
ment cover and screw (Figure 2).
2. Using a Phillips head screwdriver, remove screw and cover.
proper slots in the battery compartment (Figure 3). Proper battery orienta-
tion is indicated on the battery compartment.
Magnet
Magnet
Ridge Tool Company
SeeSnake
with its taller portion toward the LCD screen.
5. Replace battery cover (Figure 2) and screw.
To use the display unit (Figure 1), it must be connected to the imager head
cable.
To connect the cable to the display unit, make sure the keyed ends (Figure 4)
hold the connection in place.
To Install an Accessory:
to the imager head the same way.
To connect, hold the imager head as shown in Figure 5.
accessory is extending out as shown in Figure 6.
Micro
® ™
Tools For The Professional
(Figure 1) all attach
TM
3